D-Link R12 User Manual - Page 52
Enable, DHCP-PD, SLAAC+RDNSS, SLAAC+Stateless DHCP, Stateful DHCPv6
![]() |
View all D-Link R12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Section 3 - Configuration Advanced Settings... - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment Enable or disable the Automatic IPv6 Address Assignment. Enable Automatic DHCP-PD in LAN Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. This option is only available if Enable DHCP-PD is enabled in the previous LAN IPv6 Address Settings. Autoconfiguration Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful Type DHCPv6. If you select SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type: Router Advertisement Lifetime Enter the router advertisement lifetime (in minutes). If you select Stateful DHCPv6 as the Autoconfiguration Type: IPv6 Address Enter the start IPv6 address for the DHCP server's IPv6 Range (Start) assignment. IPv6 Address Enter the end IPv6 address for the DHCP server's IPv6 Range (End) assignment. D-Link R12 User Manual 47
![](/manual_guide/products/dlink-r12-user-manual-ec5fa33/52.png)