D-Link R12 User Manual - Page 47
IPv6 - Auto Configuration (SLAAC/DHCPv6), Auto Configuration, IPv6 DNS Settings
![]() |
View all D-Link R12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Section 3 - Configuration IPv6 - Auto Configuration (SLAAC/DHCPv6) Select Auto Configuration if your ISP assigns an IPv6 address when your router requests one from the ISP's server. Some ISPs require you to configure relevant settings in advance before your router can connect to the IPv6 Internet. Click Save at any time to save the changes you have made on this page. DNS Type Primary DNS Server Secondary DNS Server IPv6 DNS Settings Select either Obtain DNS server address automatically or Use the following DNS address. If you select Use the following DNS address, enter the primary DNS server address. If you select Use the following DNS address, enter the secondary DNS server address. LAN IPv6 Address Settings Enable DHCP-PD Enable or disable prefix delegation. LAN IPv6 Link-Local Displays the router's LAN link-local address. Address If Enable DHCP-PD is disabled, configure the following: LAN IPv6 Address Enter a valid LAN IPv6 address. LAN IPv6 Link-Local Displays the router's LAN link-local address for the local Address network only. D-Link R12 User Manual 42
![](/manual_guide/products/dlink-r12-user-manual-ec5fa33/47.png)