D-Link R12 User Manual - Page 41
IPv4 - DS-Lite, DS-Lite
![]() |
View all D-Link R12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Section 3 - Configuration IPv4 - DS-Lite DS-Lite allows local IPv4 packets to travel through an IPv6 network. After selecting DS-Lite, the following parameters will be available for configuration. Click Save at any time to save the changes you have made on this page. Advanced Settings... DS-Lite Configuration Select DS-Lite DHCPv6 Option to let the router allocate the AFTR IPv6 (Address Family Transition Router) address automatically. Select Manual Configuration to enter the AFTR IPv6 address manually. Advanced Settings... - DS-Lite DHCPv6 Option B4 IPv4 Address WAN IPv6 Address IPv6 WAN Default Gateway Enter the B4 (Basic Bridging Broadband) IPv4 address that will be encapsulated into IPv6 packets to transmit over an IPv6 network. Once connected, the WAN IPv6 address will be displayed here. Once connected, the IPv6 WAN default gateway address will be displayed here. Advanced Settings... - Manual Configuration Option AFTR IPv6 Address Enter the Address FamilyTransition Router (AFTR) IPv6 address. This is where an IPv6 packet will be decapsulated. B4 IPv4 Address Enter the B4 IPv4 address. WAN IPv6 Address Once connected, the WAN IPv6 address will be displayed here. IPv6 WAN Default Once connected, the IPv6 WAN default gateway address will Gateway be displayed here. D-Link R12 User Manual 36
![](/manual_guide/products/dlink-r12-user-manual-ec5fa33/41.png)