Dell 5100MP User Guide - Page 22
Video, M1-D, D-sub, BNC, Component, HDMI, Auto adjust - replacement lamp
UPC - 884116003892
View all Dell 5100MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
www.dell.com | support.dell.com 4 Source 5 Keystone adjustment 6 Enter 7 Auto adjust 8 LCD status display 9 TEMP warning light 10 LAMP warning light 11 and buttons 12 Keystone adjustment 13 Up and Down 14 Brightness and contrast control Press to toggle through S-video, Composite Video, M1-D, D-sub, BNC, Component, HDMI and M1 sources when multiple sources are connected to the projector. Press to adjust image distortion caused by tilting the projector. (±20 degrees) Press to confirm the selection item. Press to synchronize the projector to the input source. Auto adjust does not operate if the on-screen display (OSD) is displayed. LCD display is for real time projector status. • If the TEMP light is solid orange, the projector has overheated. The display automatically shuts down. Turn the display on again after the projector cools down. If the problem persists, contact Dell. • If the TEMP light is blinking orange, a projector fan has failed and the projector automatically shuts down. If the problem persists, contact Dell. If the LAMP light is solid orange, replace the lamp. Press to adjust the OSD setting. Press to adjust image distortion caused by tilting the projector. (±20 degrees) Press to select the OSD items. Press to control brightness and contrast, press or to adjust brightness or contrast, then press and buttons to adjust the value. 22 Using Your Projector