Dell AX4-5 Hardware Installation Guide - Page 50
Table A-1., General Cluster Troubleshooting, Problem, Probable Cause, Corrective Action - power
View all Dell AX4-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Table A-1. General Cluster Troubleshooting (continued) Problem You are prompted to configure one network instead of two during MSCS installation. Probable Cause Corrective Action The TCP/IP configuration is incorrect. The node-to-node network and public network must be assigned static IP addresses on different subnets. For information about assigning the network IPs with a specific variant of the Windows Server operating system (for example: Windows Server 2003 or Windows Server 2008), see Dell Failover Clusters with Microsoft Windows Server Installation and Troubleshooting Guide. The private (point-to- Ensure that all systems are point) network is powered on so that the NICs in disconnected. the private network are available. Using Microsoft Windows NT® 4.0 to remotely administer a Windows Server 2003 cluster generates error messages. Normal. Some Dell strongly recommends that resources in you use Windows XP Windows Server 2003 Professional or Windows Server are not supported in 2003 for remote administration Windows NT 4.0. of a cluster running Windows Server 2003. 50 Appendix:Troubleshooting