Dell Alienware 15 R3 Service Manual - Page 19
Replacing the base cover, Procedure - battery replacement
View all Dell Alienware 15 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Replacing the base cover WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Connect the battery cable to the system board. 2 Slide the tabs on the base cover into the slots on the computer base and snap the base cover into place. 3 Tighten the captive screw that secures the base cover to the computer base. 4 Replace the six screws (M2.5x13) that secure the base cover to the computer base. 19
Replacing the base cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your computer
.
For more safety best practices, see the Regulatory Compliance home
page at
www.dell.com/regulatory_compliance
.
Procedure
1
Connect the battery cable to the system board.
2
Slide the tabs on the base cover into the slots on the computer base and snap
the base cover into place.
3
Tighten the captive screw that secures the base cover to the computer base.
4
Replace the six screws (M2.5x13) that secure the base cover to the computer
base.
19