Dell Alienware 15 R3 Service Manual - Page 95
Replacing the display panel, Procedure, Post-requisites
View all Dell Alienware 15 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Replacing the display panel WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Slide the display cable into the connector on the display panel and close the latch to secure the cable. 2 Adhere the tape that secures the display cable to the display panel. 3 Turn the display panel over and gently place it on the display back-cover. 4 Align the screw holes on the display panel with the screw holes on the display back-cover. 5 Replace the four screws (M2x3) that secure the display panel to the display back-cover. Post-requisites 1 Replace the camera. 2 Replace the display bezel. 3 Replace the display assembly. 4 Follow the procedure from step 2 to step 16 in "Replacing the system board". 5 Replace the memory modules. 6 Replace the battery. 7 Replace the computer base. 8 Replace the rear-I/O cover. 9 Replace the solid-state drive. 10 Follow the procedure from step 4 to step 6 in "Replacing the hard drive". 11 Replace the wireless card. 12 Replace the base cover. 95