Dell Alienware 15 R3 Service Manual - Page 87
Replacing the display assembly, Procedure, Post-requisites
View all Dell Alienware 15 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Replacing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Align the screw holes on the display hinges with the screw holes on the palmrest assembly. 2 Replace the six screws (M2.5x5) that secure the display assembly to the palmrest assembly. Post-requisites 1 Follow the procedure from step 2 to step 16 in "Replacing the system board". 2 Replace the memory modules. 3 Replace the battery. 4 Replace the computer base. 5 Replace the rear-I/O cover. 6 Replace the solid-state drive. 7 Follow the procedure from step 4 to step 6 in "Replacing the hard drive". 8 Replace the wireless card. 9 Replace the base cover. 87