Dell Alienware 15 R3 Service Manual - Page 50
Removing the touch pad, Prerequisites, Procedure, computer, follow the instructions
View all Dell Alienware 15 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Removing the touch pad WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the wireless card. 3 Follow the procedure from step 1 to step 3 in "Removing the hard drive". 4 Remove the solid-state drive. 5 Remove the rear-I/O cover. 6 Remove the computer base. 7 Remove the battery. Procedure 1 Open the latch and disconnect the touch-pad cable from the system board. 2 Open the latches and disconnect the touch-pad cable and the touch-pad buttons cable from the touch pad. 3 Remove the five screws (M2x3) that secure the touch-pad bracket to the palm-rest assembly. 50