Dell Alienware 15 R3 Service Manual - Page 91
Replacing the display bezel, Procedure, Post-requisites
View all Dell Alienware 15 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Replacing the display bezel WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Place the display assembly on a clean and flat surface. 2 Connect the tron-light cables to the logo board. 3 Connect the logo-board cable to the logo board. 4 Slide the alien head cable into the logo board and close the latch to secure the cable. 5 Carefully turn the display bezel over. 6 Align the display bezel with the display back-cover and gently snap the display bezel into place. Post-requisites 1 Replace the display assembly. 2 Follow the procedure from step 2 to step 16 in "Replacing the system board". 3 Replace the memory modules. 4 Replace the battery. 5 Replace the computer base. 6 Replace the rear-I/O cover. 7 Replace the solid-state drive. 8 Follow the procedure from step 4 to step 6 in "Replacing the hard drive". 9 Replace the wireless card. 10 Replace the base cover. 91