Dell Alienware 15 R3 Service Manual - Page 88
Removing the display bezel, Prerequisites, Procedure
View all Dell Alienware 15 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Removing the display bezel WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the wireless card. 3 Follow the procedure from step 1 to step 3 in "Removing the hard drive". 4 Remove the solid-state drive. 5 Remove the rear-I/O cover. 6 Remove the computer base. 7 Remove the battery. 8 Remove the memory modules. 9 Follow the procedure from step 1 to step 17 in "Removing the system board". 10 Remove the display assembly. Procedure 1 Using your fingertips, carefully pry up the inside edges of the display bezel. 88