Dell Alienware 15 R3 Service Manual - Page 39
Removing the computer base, Prerequisites, Procedure
View all Dell Alienware 15 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Removing the computer base WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Follow the procedure from step 1 to step 3 in "Removing the hard drive". 3 Remove the solid-state drive. 4 Remove the wireless card. 5 Remove the rear-I/O cover. Procedure 1 Note the cable routing and remove the antenna cables from the routing guides on the computer base. 2 Disconnect the tron-light cable from the system board. 3 Open the latch and disconnect the macro-keys cable, and then remove the cable from the routing guide on the computer base. 4 Open the latch and disconnect the keyboard-backlight cable, and then remove the cable from the routing guide on the computer base. 5 Open the latch and disconnect the keyboard cable, and then remove the cable from the routing guide on the computer base. 39