Dell Alienware M17x Service Manual - Page 19
Replacing the Hard Drive(s - driver
UPC - 074450000071
View all Dell Alienware M17x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Replacing the Hard Drive(s) 1. Remove the new drive from its packaging. Save the original packaging for storing or shipping the hard drive. CAUTION: Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector. 2. Connect the interposer to the secondary hard drive (HDD1), if applicable. 3. Slide the hard drive into the hard drive bracket. 4. Replace the four screws that secure the hard drive bracket to the hard drive. 5. Place the hard drive in the hard drive bay. a. If your computer has a secondary hard drive (HDD1), align and tighten the four captive screws that secure the hard drive to the hard drive bay. b. Align and and tighten the four captive screws that secure the primary hard drive (HDD0) to the hard drive bay. CHAPTER 4: HARD DRIVE(S) 6. Replace the compartment door (see "Replacing the Compartment Door" on page 14). 7. Replace the battery pack (see "Replacing the Battery Pack" on page 11). CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. 8. Install the operating system for your computer, as needed. 9. Install the drivers and utilities for your computer, as needed. 019 /019