Dell Alienware M17x Service Manual - Page 53
Removing the Display Assembly
UPC - 074450000071
View all Dell Alienware M17x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Display WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To help prevent damage to the system board, remove the main battery (see "Removing the Battery Pack" on page 11) before working inside the computer. CAUTION: To avoid damage to the display, you must not disassemble your Edge-to-Edge display assembly in the field. Display Assembly CHAPTER 13: DISPLAY Removing the Display Assembly 1. Follow the instructions in "Before You Begin" on page 6. 2. Remove the battery pack (see "Removing the Battery Pack" on page 11). 3. Remove the center control cover (see "Removing the Center Control Cover" on page 33). 4. Remove the keyboard (see "Removing the Keyboard" on page 38). 5. Remove the palm rest (see "Removing the Palm Rest" on page 42). 6. Remove the left and right brackets (see "Removing the Brackets" on page 47). 7. Remove the magnesium cover (see "Removing the Magnesium Cover" on page 50). 053 /053