Dell CX4 Troubleshooting Guide - Page 30
Connect a cable from Fibre Channel switch 0 sw0 to the first front, end fibre channel port on SP-B. - emc 120
View all Dell CX4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Figure 2-10. Cabling a SAN-Attached Cluster to the Dell/EMC CX4-120 or CX4-240 cluster node 1 cluster node 2 HBA ports (2) 01 HBA ports (2) 01 sw0 SP-B sw1 SP-A 1 0123 1 0123 0 0 CX4-120 or CX4-240 storage system Cabling a SAN-Attached Cluster to the Dell/EMC CX4-480 or CX4-960 Storage System 1 Connect cluster node 1 to the SAN: a Connect a cable from HBA port 0 to Fibre Channel switch 0 (sw0). b Connect a cable from HBA port 1 to Fibre Channel switch 1 (sw1). 2 Repeat step 1 for each additional cluster node. 3 Connect the storage system to the SAN: a Connect a cable from Fibre Channel switch 0 (sw0) to the first frontend fibre channel port on SP-A. b Connect a cable from Fibre Channel switch 0 (sw0) to the first frontend fibre channel port on SP-B. c Connect a cable from Fibre Channel switch 0 (sw0) to the second front-end fibre channel port on SP-A. 30 Cabling Your Cluster Hardware