Dell DR4000 Command Line Reference Guide - Page 35
restart
View all Dell DR4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
--show To display the current networking configuration for a DR4000 system, enter the example command string at the system prompt: administrator@mydr4000 > network --show Device Boot protocol IP Addr Netmask Gateway MAC Addr MTU Bonding options Slave Interfaces eth0 MAC eth0 Max Speed eth0 Speed eth0 Duplex eth1 MAC eth1 Max Speed eth1 Speed eth1 Duplex eth2 MAC eth2 Max Speed eth2 Speed eth2 Duplex eth3 MAC eth3 Max Speed eth3 Speed eth3 Duplex DNS Suffix Primary Nameserver Secondary Nameserver : bond0 : dhcp : 10.20.24.55 : 255.255.252.0 : 10.20.32.13 : 78:2B:CB:47:D0:08 : 1500 : "mode=balance-alb miimon=100 xmit_hash_policy=2" : eth0,eth1,eth2,eth3 : 78:2B:CB:47:D0:08 : 1000baseT/Full : 1000Mb/s : Full : 78:2B:CB:47:D0:09 : 1000baseT/Full : Unknown : Unknown : 00:1B:21:C5:92:B8 : 10000baseT/Full : Unknown : Unknown : 00:1B:21:C5:92:B9 : 10000baseT/Full : Unknown : Unknown : storage.local : 10.25.19.15 : 10.25.19.16 --restart To restart the current networking configuration for a DR4000 system, enter the example command string at the system prompt: administrator@mydr4000 > network --restart Shutting down interface bond0: [ OK ] Managing the DR4000 System 25