Dell DR4000 Command Line Reference Guide - Page 42
Slave Interface: eth3
View all Dell DR4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:50:56:9a:00:96 Slave Interface: eth1 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:50:56:9a:00:97 Slave Interface: eth2 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:50:56:9a:00:98 Slave Interface: eth3 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:50:56:9a:00:99 *** Getting Gateway status Gateway IP address is 10.25.20.1 Route to the gateway is up and uses bond0 interface. Pinging gateway 10.25.20.1 Ping successful. No packet loss. RTT timings min/avg/max/mdev = 0.744/0.774/0.824/0.035 ms *** Checking NTP configuration Network time is enabled. 32 Managing the DR4000 System
32
Managing the DR4000 System
Slave Interface: eth0
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:50:56:9a:00:96
Slave Interface: eth1
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:50:56:9a:00:97
Slave Interface: eth2
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:50:56:9a:00:98
Slave Interface: eth3
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:50:56:9a:00:99
*** Getting Gateway status
Gateway IP address is 10.25.20.1
Route to the gateway is up and uses bond0 interface.
Pinging gateway 10.25.20.1
Ping successful. No packet loss.
RTT timings min/avg/max/mdev = 0.744/0.774/0.824/0.035 ms
*** Checking NTP configuration
Network time is enabled.