Dell DR4000 Command Line Reference Guide - Page 36
setdhcp, setstatic_ip, --ip <ip address>, --netmask <netmask>, --gateway <ip, address
View all Dell DR4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface bond0: Determining IP information for bond0... done. [ OK ] --setdhcp To configure the DR4000 system to change to use the DHCP IP addressing, enter the example command string at the system prompt: administrator@mydr4000 > network --setdhcp Bond device operation successful. Please run 'network -restart' for the changes to take affect. --setstatic_ip, --ip , --netmask , --gateway To configure the DR4000 system to use a static IP address (and/or configure the corresponding netmask and the routing gateway for a DR4000 system), enter the example commands string at the system prompt: administrator@mydr4000 > network --setstatic_ip --ip 10.20.20.20 --netmask 255.255.222.0 --gateway 10.25.20.10 Bond device operation successful. Network restart is necessary for the changes to take effect. If no options are specified, the following prompts are shown: administrator@mydr4000 > network --setstatic_ip --ip missing: static IP address to use --netmask missing: netmask for the static IP address --gateway missing: gateway for routing --setdns, --suffix , --primary [--secondary ] To configure the Domain Name System (DNS) for a DR4000 system, which includes the corresponding DNS suffix, primary name server IP address (and an optional secondary name server IP address), enter the example commands string at the system prompt: 26 Managing the DR4000 System