Dell Force10 C300 C300 Hardware Installation Guide - Page 57

The Compact Flash Card

Get Dell Force10 C300 PDF manuals and user guides View all Dell Force10 C300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

13 The Compact Flash Card Each RPM is designed with a slot (slot0:) to accommodate a Compact Flash Card (external compact flash memory card). You can use the Compact Flash Card to store and retrieve boot and system images. For complex configurations, you can copy your configurations onto the Compact Flash Card and then transfer the configuration to other C300 systems in your network. NOTE: Use only a Dell Force10 Compact memory card in your C300 System. Additional memory cards can be purchased from Dell Force10. Inserting the Compact Flash Card NOTE: Insert the Compact Flash Card either before system boot or after the system has completed booting and is in run-time mode. To install the Compact Flash card: Step Task 1 Hold the flash card horizontally with the side with the serial number facing up (the numbers should be oriented so you can read them) See Figure 13-1 for the proper orientation. Figure 13-1. Inserting the Compact Flash Card in RPM fnC0010mp Compact Flash S/N 012345678 2 Insert the flash card into the primary RPM flash slot until the card is completely seated with the connectors at the rear of the slot. NOTE: Do not force the card into the slot. The slot is designed to prevent improper installation. The In Use LED lights only during read or write operations. Removing the Compact Flash Card CAUTION: Do not remove the Compact Flash Card when the In Use LED is lit. The Compact Flash Card | 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
The Compact Flash Card
|
57
13
The Compact Flash Card
Each RPM is designed with a slot (slot0:) to accommodate a Compact Flash Card (external compact flash
memory card). You can use the Compact Flash Card to store and retrieve boot and system images. For
complex configurations, you can copy your configurations onto the Compact Flash Card and then transfer
the configuration to other C300 systems in your network.
NOTE:
Use only a Dell Force10 Compact memory card in your C300 System. Additional memory cards can
be purchased from Dell Force10.
Inserting the Compact Flash Card
NOTE:
Insert the Compact Flash Card either before system boot or after the system has completed booting
and is in run-time mode.
To install the Compact Flash card:
Removing the Compact Flash Card
CAUTION:
Do not remove the Compact Flash Card when the In Use LED is lit.
Step
Task
1
Hold the flash card horizontally with the side with the serial number facing up (the numbers should be oriented so
you can read them) See
Figure
13-
1
for the proper orientation.
Figure 13-1.
Inserting the Compact Flash Card in RPM
2
Insert the flash card into the primary RPM flash slot until the card is completely seated with the connectors at the
rear of the slot.
NOTE:
Do not force the card into the slot. The slot is designed to prevent improper installation. The In Use
LED lights only during read or write operations.
fnC0010mp
Compact Flash
S/N 012345678