Dell Force10 S50-01-GE-48T FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 31

secondary file-url After entering rpm0 or rpm1, enter the keyword secondary to configure boot parameters used if the primary operating system boot selection is not available. To boot from a file: • on the internal Flash, enter flash:// followed by the filename. • on an FTP server, enter ftp://user:password@hostip/filepath • on the external Flash, enter slot0:// followed by the filename. • on a TFTP server, enter tftp://hostip/filepath Defaults Not configured. Command Modes CONFIGURATION Command History Version 7.5.1.0 Introduced on C-Series E-Series original Command Usage To display these changes in the show bootvar command output, you must save the running Information configuration to the startup configuration (using the copy command) and reload system. Related Commands change bootflash-image boot system gateway Change the primary, secondary, or default boot image configuration. Specify the IP address of the default next-hop gateway for the management subnet. boot system gateway c e Specify the IP address of the default next-hop gateway for the management subnet. Syntax boot system gateway ip-address Parameters ip-address Enter an IP address in dotted decimal format. Command Modes CONFIGURATION Usage Saving the address to the startup configuration file preserves the address in NVRAM in case the startup Information configuration file is deleted. Command History Version 7.5.1.0 Introduced on C-Series E-Series original Command Related Commands change bootflash-image Change the primary, secondary, or default boot image configuration. cd c e s Change to a different working directory. Syntax cd directory File Management | 31