Dell Inspiron 14 M4010 Inspiron 14 AMD M4010 Service Manual - Page 32
I/O Board
View all Dell Inspiron 14 M4010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Back to Contents Page I/O Board Dell™ Inspiron™ N4010 Service Manual Removing the I/O Board Replacing the I/O Board WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer. Removing the I/O Board 1. Follow the instructions in Before You Begin. 2. Remove the battery (see Removing the Battery). 3. Follow the instructions from step 3 to step 4 in Removing the Optical Drive. 4. Remove the module cover (see Removing the Module Cover). 5. Remove the memory module(s) (see Removing the Memory Module(s)). 6. Remove the keyboard (see Removing the Keyboard). 7. Remove the palm rest (see Removing the Palm Rest). 8. Remove the display assembly (see Removing the Display Assembly). 9. Remove the middle cover (see Removing the Middle Cover). 10. Disconnect the I/O board cable from the connector on the system board. 11. Remove the three screws that secure the I/O board to the computer base. 12. Lift the I/O board out of the computer base. 1 I/O board 2 screws (3) 3 I/O board cable connector Replacing the I/O Board