Dell Inspiron 16 7630 2-in-1 Service Manual - Page 10
Removing and installing components, Recommended tools, Screw list
![]() |
View all Dell Inspiron 16 7630 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2 Removing and installing components NOTE: The images in this document may differ from your computer depending on the configuration you ordered. Recommended tools The procedures in this document may require the following tools: ● Phillips screwdriver #0 ● Phillips screwdriver #2 Screw list NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced. NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component. NOTE: Screw color may vary with the configuration ordered. Table 1. Screw list Component Base cover Screw type M2x4 Quantity 6 Screw image Base cover Captive screw 3 4-cell battery (64 Wh) M2x3.5 4 6-cell battery (86 Wh) M2x3.5 6 M.2 2230 mounting bracket M2x1.8 1 M.2 2230 solid-state drive M2x3 1 M.2 2280 solid-state drive M2x3 1 Fan M2x3 3 Wireless-card bracket M2x3 1 I/O board M2x3 2 10 Removing and installing components
![](/manual_guide/products/dell-inspiron-16-7630-2in1-service-manual-9523417/10.png)