Dell Inspiron 16 7630 2-in-1 Service Manual - Page 41
Power button, Removing the power button
View all Dell Inspiron 16 7630 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Steps 1. Place the heat-sink on the system board. 2. Align the screw holes on the heat sink with the screw holes on the system board. 3. In sequential order (1 > 2 > 3 > 4 > 5 > 6 > 7) tighten the seven captive screws that secure the heat sink to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Power button Removing the power button Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: This procedure applies only to computers shipped with a standard power button. The following image(s) indicate the location of the power button and provides a visual representation of the removal procedure. Removing and installing components 41