Dell Inspiron 16 7630 2-in-1 Service Manual - Page 33

Display assembly, Removing the display assembly

Get Dell Inspiron 16 7630 2-in-1 PDF manuals and user guides View all Dell Inspiron 16 7630 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Steps 1. Place the I/O board on the palm-rest and keyboard assembly. 2. Align the screw holes on the I/O board with the screw holes on the palm-rest and keyboard assembly. 3. Replace the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly. 4. Connect the I/O-board cable to the connector on the I/O board and close the latch. 5. Adhere the tape over the screw on the I/O board. 6. Connect the coin-cell battery to the connector on the I/O board. 7. Connect the I/O-board cable to the I/O board and close the latch. 8. Close the left display hinge and align the screw holes on the left display hinge with the screw holes on the I/O board. 9. Replace the two screws (M2.5x5) and the screw (M2x4) that secure the left display hinge to the palm-rest and keyboard assembly. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Display assembly Removing the display assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. Removing and installing components 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Steps
1.
Place the I/O board on the palm-rest and keyboard assembly.
2.
Align the screw holes on the I/O board with the screw holes on the palm-rest and keyboard assembly.
3.
Replace the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
4.
Connect the I/O-board cable to the connector on the I/O board and close the latch.
5.
Adhere the tape over the screw on the I/O board.
6.
Connect the coin-cell battery to the connector on the I/O board.
7.
Connect the I/O-board cable to the I/O board and close the latch.
8.
Close the left display hinge and align the screw holes on the left display hinge with the screw holes on the I/O board.
9.
Replace the two screws (M2.5x5) and the screw (M2x4) that secure the left display hinge to the palm-rest and keyboard
assembly.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
Display assembly
Removing the display assembly
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
Removing and installing components
33