Dell Inspiron 16 Plus 7630 Owners Manual- NVIDIA GeForce RTX 4060 - Page 42
Removing the M.2 2280 solid-state drive, Steps, Next steps, Prerequisites, About this task
View all Dell Inspiron 16 Plus 7630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Steps 1. Align the screw hole on the M.2 2230 solid-state drive with the screw hole on the M.2 solid-state drive mounting bracket. 2. Replace the screw (M2x2) that secures the M.2 2230 solid-state drive to the M.2 solid-state drive mounting bracket. 3. Flip over the M.2 2230 solid-state drive assembly. 4. Align the notch on the M.2 2230 solid-state drive with the tab on the solid-state drive slot. 5. Slide the M.2 2230 solid-state drive into the M.2 solid-state drive slot on the system board. 6. Place the M.2 thermal shield on the M.2 2230 solid-state drive. 7. Replace the screw (M2x3) that secures the M.2 2230 solid-state drive and thermal shield to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Removing the M.2 2280 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your computer. 2. Remove the base cover. About this task NOTE: This procedure applies only to computers shipped with an M.2 2280 solid-state drive installed. NOTE: The M.2 solid-state drive installed on your computer depends on the configuration ordered. The M.2 slot supports one of the following solid-state drives: ● M.2 2230 solid-state drive ● M.2 2280 solid-state drive The following image(s) indicate the location of the M.2 2280 solid-state drive and provides a visual representation of the removal procedure. 42 Removing and installing Customer Replaceable Units (CRUs)