Dell Inspiron 16 Plus 7630 Owners Manual- NVIDIA GeForce RTX 4060 - Page 69
Power button with optional fingerprint reader
View all Dell Inspiron 16 Plus 7630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Steps 1. Place the power-button board on the palm-rest and keyboard assembly. 2. Align the screw holes of the power-button board with the screw holes on the palm-rest and keyboard assembly. 3. Replace the screw (M2x3) that secures the power-button board to the palm-rest and keyboard assembly. 4. Connect the power-button board cable to its connector on the system board and close the latch. 5. Adhere the power-button cable to the palm-rest and keyboard assembly. Next steps 1. Install the heat sink. 2. Install the left fan 3. Install the base cover. 4. Follow the procedure in After working inside your computer. Power button with optional fingerprint reader Removing the power button with optional fingerprint reader CAUTION: The information in this section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your computer. 2. Remove the base cover. Removing and installing Field Replaceable Units (FRUs) 69