Dell Inspiron 16 Plus 7630 Owners Manual- NVIDIA GeForce RTX 4060 - Page 78
Power-adapter port, Removing the power-adapter port
View all Dell Inspiron 16 Plus 7630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Power-adapter port Removing the power-adapter port CAUTION: The information in this section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your computer. 2. Remove the base cover. 3. Remove the system board. NOTE: The system board can be removed and installed with the M.2 solid-state drive, memory module, and heat sink attached. About this task The following image(s) indicate the location of the power-adapter port and provides a visual representation of the removal procedure. Steps 1. Remove the two screws (M2.5x5.5) that secure the right display-assembly hinge to the system board. 2. Open the right display-assembly hinge at an angle of 90 degrees. 3. Lift the power-adapter port and its cable off the palm-rest and keyboard assembly. Installing the power-adapter port CAUTION: The information in this section is intended for authorized service technicians only. Prerequisites If you are replacing a component, remove the existing component before performing the installation process. 78 Removing and installing Field Replaceable Units (FRUs)