Dell Inspiron 16 Plus 7630 Owners Manual- NVIDIA GeForce RTX 4060 - Page 81
Palm-rest and keyboard assembly
View all Dell Inspiron 16 Plus 7630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Steps 1. Place the touchpad onto the palm-rest and keyboard assembly. 2. Place the touchpad bracket onto the touchpad and align the screw holes on the touchpad bracket to the screw holes on the palm-rest and keyboard assembly. 3. Replace the five screws (M2x2) and seven screws (M2x1.8) that secure the touchpad bracket to the palm-rest and keyboard assembly. 4. Adhere the tapes to secure the speakers (woofers) and antenna cables onto the touchpad. 5. Place the touchpad cable on the palm-rest and keyboard assembly. 6. Connect the touchpad cable to its connector on the touchpad and close the latch. 7. Connect the touchpad cable to its connector on the system board and close the latch. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Palm-rest and keyboard assembly Removing the palm-rest and keyboard assembly CAUTION: The information in this section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4. Remove the wireless card. Removing and installing Field Replaceable Units (FRUs) 81