Dell Inspiron 1721 View - Page 162
Replacing a WPAN Card, Internal Card With Bluetooth® Wireless Technology, Removing the Card
UPC - 802700888373
View all Dell Inspiron 1721 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Replacing a WPAN Card NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card. NOTICE: To avoid damage to the WPAN card, never place cables under the card. 1 Insert the WPAN card connector at a 45-degree angle into the system board connector labeled "WPAN". 2 Press the other end of the WPAN card down into the securing tabs until the card clicks into place. 3 Connect the blue antenna cable to the WPAN card. 4 Secure unused antenna cables in the protective mylar sleeve. 5 Replace the cover and tighten the captive screws. Internal Card With Bluetooth® Wireless Technology CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer. If you ordered a card with Bluetooth wireless technology with your computer, it is already installed. Removing the Card 1 Follow the procedures in "Before You Begin" on page 135. 2 Remove the hinge cover (see "Hinge Cover" on page 142). 3 Disconnect the cable on the card. 4 Grasp the connector end of the card and slide it out from under the securing tabs. 162 Adding and Replacing Parts