Dell Inspiron X200 Service Manual - Page 28
Speakers
View all Dell Inspiron X200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Back to Contents Page Speakers Dell™ X200 Service Manual Removing the Speakers NOTICE: Disconnect the computer and any attached devices from electrical outlets. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure. 1. Remove the battery. 2. Remove the keyboard. 3. Remove the palm rest. 4. Remove the M2 x 4-mm screw that secures the speaker to the bottom case. NOTE: The left and right speakers are interchangeable. 1 system board connector (1 per speaker) 2 speaker connector (1 per speaker) 3 M2 x 4-mm screw (1 per speaker) 4 speaker cable (1 per speaker) 5 speakers (2) NOTICE: Do not pull on the speaker cable. Pull from the speaker connector to disconnect the cable. 5. Disconnect the speaker cable from the system board connector. NOTICE: Handle the speakers with care to avoid damaging them. 6. Remove the speaker by pulling it straight up and out of the bottom case. Back to Contents Page