Dell Latitude 5404 Dell Latitude 14 Rugged 5404Series Owners Manual - Page 14

Removing the Memory Module, Removing the Docking Board, Battery, After Working Inside Your computer

Page 14 highlights

a. Battery 7. Follow the procedures in After Working Inside Your computer Removing the Memory Module 1. Follow the procedures in Before Working Inside Your Computer 2. Remove: a. Battery b. Hard Drive c. Optical Drive d. Bottom Cover 3. Pry the securing clips away from the memory module until it pops up 4. Remove the memory module from its connector on the system board. Installing the Memory Module 1. Insert the memory module into the memory socket. 2. Press the memory module down until it clicks into place. 3. Install: a. Bottom Cover b. Optical Drive c. Hard Drive d. Battery 4. Follow the procedures in After Working Inside Your computer Removing the Docking Board 1. Follow the procedures in Before Working Inside Your Computer 2. Remove: a. Battery b. Bottom Cover 3. Perform the following steps as shown in the illustration: a. Disconnect the antenna cables from the docking board [1]. CAUTION: Exercise caution while disconnecting the antenna cables. Improper removal may result in damage/breakage of the antenna cables. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58

a.
Battery
7.
Follow the procedures in
After Working Inside Your computer
Removing the Memory Module
1.
Follow the procedures in
Before Working Inside Your Computer
2.
Remove:
a.
Battery
b.
Hard Drive
c.
Optical Drive
d.
Bottom Cover
3.
Pry the securing clips away from the memory module until it pops up
4.
Remove the memory module from its connector on the system board.
Installing the Memory Module
1.
Insert the memory module into the memory socket.
2.
Press the memory module down until it clicks into place.
3.
Install:
a.
Bottom Cover
b.
Optical Drive
c.
Hard Drive
d.
Battery
4.
Follow the procedures in
After Working Inside Your computer
Removing the Docking Board
1.
Follow the procedures in
Before Working Inside Your Computer
2.
Remove:
a.
Battery
b.
Bottom Cover
3.
Perform the following steps as shown in the illustration:
a.
Disconnect the antenna cables from the docking board [1].
CAUTION: Exercise caution while disconnecting the antenna cables. Improper removal
may result in damage/breakage of the antenna cables.
14