Dell Latitude 5404 Dell Latitude 14 Rugged 5404Series Owners Manual - Page 27
Installing the I/O Board, Removing the Optical Drive, Bottom Cover, Optical Drive, Hard Drive, Battery
View all Dell Latitude 5404 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installing the I/O Board 1. Place the I/O board on the computer. 2. Tighten the scews that secure the I/O board to the computer. 3. Connect display assembly cable to the computer. 4. Connect the I/O cable to the computer 5. Tighten the screw that secures the I/O board. 6. Slide the I/O into its place on the computer. 7. Close the I/O bay press the latch door. 8. Install: a. Bottom Cover b. Optical Drive c. Hard Drive d. Battery 9. Follow the procedures in After Working Inside Your computer Removing the Optical Drive 1. Follow the procedures in Before Working Inside Your Computer 2. Remove: a. Battery b. Hard Drive c. Optical Drive d. Bottom Cover 3. Perform the following steps as shown in the illustration: a. Remove the screws that secure the optical drive connector to the computer [1]. b. Lift the connector upward direction [2]. c. Remove the screws that secure the connector to the computer [3]. 27