Dell OptiPlex 3010 User Manual - Page 35
System Setup Options - maximum memory
View all Dell OptiPlex 3010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Action Exit BIOS Change a setting Select field to change Cancel modification Reset defaults Keystroke - Remain in Setup, Save/Exit, Discard/Exit Left or right-arrow key or Load Defaults menu option System Setup Options NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not appear. Table 1. General Option System Information Description Displays the following information: • System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Date, Manufacture Date, and the Express Service Code. • Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channels Mode, Memory Technology, DIMM 1 Size, DIMM 2 Size, DIMM 3 Size, and DIMM 4 Size. • Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit Technology. • PCI Information: Displays SLOT1, SLOT2, SLOT3, SLOT4 • Device Information: Displays SATA-0, SATA-1, SATA-2, SATA-3, and LOM MAC Address. Boot Sequence Allows you to specify the order in which the computer attempts to find an operating system from the devices specified in this list. • USB Storage Device • CD/DVD/CD-RW Drive • Onboard NIC Date/Time Allows you to set the date and time settings. Changes to the system date and time take effect immediately. Table 2. System Configuration Option Integrated NIC Description Allows you to enable or disable the integrated network card. You can set the integrated NIC to: • Disabled • Enabled (default) • Enabled w/PXE • Enabled w/ImageServer 35