Dell OptiPlex 3010 User Manual - Page 52

Controller has failed Description The hard drive or the associated controller is defective. Data error Description The floppy or hard drive cannot read the data. For the Windows operating system, run the chkdsk utility to check the file structure of the floppy or hard drive. For any other operating system, run the appropriate corresponding utility. Decreasing available memory Description One or more memory modules may be faulty or improperly seated. Re-install the memory modules and, if necessary, replace them. Diskette drive 0 seek failure Description A cable may be loose or the computer configuration information may not match the hardware configuration. Diskette read failure Description The floppy disk may be defective or a cable may be loose. If the drive access light turns on, try a different disk. Diskette subsystem reset failed Description The floppy drive controller may be faulty. Gate A20 failure Description One or more memory modules may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them. General failure Description The operating system is unable to carry out the command. This message is usually followed by specific information-for example, Printer out of paper. Take the appropriate action to resolve the problem. Hard-disk drive configuration error Description The hard drive failed initialization. 52