Dell OptiPlex 3046 Small Form Factor Owners Manual - Page 18
Installing the power supply unit (PSU
![]() |
View all Dell OptiPlex 3046 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
5 Press the blue release tab [1], slide the PSU and lift it away from the computer [2]. Installing the power supply unit (PSU) 1 Insert the PSU in the chassis and slide it toward the back of the computer to secure it. 2 Tighten the screws to secure the PSU to the back of the computer. 3 Route the PSU cables through the retention clips. 4 Connect the power cables to the system board. 5 Install the: a fan duct b optical drive c hard drive assembly d front bezel e cover 6 Follow the procedure in After Working Inside Your Computer. Removing and installing components 18
![](/manual_guide/products/dell-optiplex-3046-small-form-factor-owners-manual-b0e1caa/18.png)
5
Press the blue release tab [1], slide the PSU and lift it away from the computer [2].
Installing the power supply unit (PSU)
1
Insert the PSU in the chassis and slide it toward the back of the computer to secure it.
2
Tighten the screws to secure the PSU to the back of the computer.
3
Route the PSU cables through the retention clips.
4
Connect the power cables to the system board.
5
Install the:
a
fan duct
b
optical drive
c
hard drive assembly
d
front bezel
e
cover
6
Follow the procedure in
After Working Inside Your Computer
.
Removing and installing components
18