Dell OptiPlex 3046 Small Form Factor Owners Manual - Page 31
Clock Speed, Minimum Clock Speed, Processor L2 Cache, Processor Type, Core Count, Current
View all Dell OptiPlex 3046 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Option Boot Sequence Advanced Boot Options Date/Time Description • Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit Technology. • Device Information: Displays SATA-0, LOM MAC Address, Video Controller, Audio Controller, Wi-Fi Device, and Bluetooth Device. Allows you to specify the order in which the computer attempts to find an operating system from the devices specified in this list. • Legacy • UEFI Allows you to select the Enable Legacy Option ROMs option, when in UEFI boot mode. By default, this option is enabled. Allows you to set the date and time settings. Changes to the system date and time take effect immediately. Table 5. System configuration Option Integrated NIC WIDI Serial Port Description Allows you to control the on-board LAN controller. The options are: • Disabled • Enabled (default) • Enabled w/PXE • Enabled w/Cloud Desktop NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not appear. Allows you to connect to display through WiFi. WIDI requires Intel WiFi card, Intel graphics, and WIDI receiver in display (or WIDI compliant display). To install the WIDI application, see the Dell.com/support site to download the WIDI application. NOTE: When installing the WIDI application, connect the display to Intel onboard graphic output. Allows you to determine how the built-in serial port to operate. The options are: • Disabled • COM 1 - Default setting • COM 2 • COM 3 • COM 4 SATA Operation Allows you to configure the operating mode of the integrated hard drive controller. • Disabled = The SATA controllers are hidden • ATA = SATA is configured for ATA mode • RAID ON = SATA is configured to support RAID mode Drives Allows you to enable or disable the various drives on-board: • SATA-0 • SATA-1 • SATA-2 System Setup 31