Dell OptiPlex 3046 Small Form Factor Owners Manual - Page 8
Installing the fan duct, Removing the memory module, Installing the memory module
![]() |
View all Dell OptiPlex 3046 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installing the fan duct 1 Align the slots on the fan duct, with the screws on the heat sink. 2 Insert the fan duct until it clicks into place. 3 Install the cover. 4 Follow the procedure in After Working Inside Your Computer. Removing the memory module 1 Follow the procedure in Before Working Inside Your Computer. 2 Remove the: a cover b fan duct c hard drive assembly d optical drive 3 To remove the memory module: a Press the memory module retention tabs on both sides of the memory module. b Lift the memory module from the memory module connector on the system board. Installing the memory module 1 Align the notch on the memory module with the tab on the memory module connector. 2 Insert the memory module into the memory module socket. 3 Press the memory module until the memory module retention tabs click into place. 4 Install the: a optical drive b hard drive assembly Removing and installing components 8
![](/manual_guide/products/dell-optiplex-3046-small-form-factor-owners-manual-b0e1caa/8.png)