Dell OptiPlex 3046 Small Form Factor Owners Manual - Page 9

Removing the intrusion switch, Installing the intrusion switch, Removing the expansion card

Get Dell OptiPlex 3046 Small Form Factor PDF manuals and user guides View all Dell OptiPlex 3046 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

c fan duct d cover 5 Follow the procedure in After Working Inside Your Computer. Removing the intrusion switch 1 Follow the procedure in Before Working Inside Your Computer. 2 Remove the: a cover b fan duct 3 To remove the intrusion switch: a Disconnect the intrusion switch cable from the connector on the system board [1][2]. b Slide the intrusion switch and lift it away from the computer [3]. Installing the intrusion switch 1 Insert the intrusion switch into the slot on the chassis. 2 Connect the intrusion switch cable to the system board. 3 Install the: a fan duct b cover 4 Follow the procedure in After Working Inside Your Computer. Removing the expansion card 1 Follow the procedure in Before Working Inside Your Computer. 2 Remove the: a cover b fan duct 3 To remove the expansion card: a Pull the metal tab to open the expansion card latch [1]. b Pull the tab forward [2] and pull the expansion card from the connector on the computer [3]. Removing and installing components 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
c
fan duct
d
cover
5
Follow the procedure in
After Working Inside Your Computer
.
Removing the intrusion switch
1
Follow the procedure in
Before Working Inside Your Computer
.
2
Remove the:
a
cover
b
fan duct
3
To remove the intrusion switch:
a
Disconnect the intrusion switch cable from the connector on the system board [1][2].
b
Slide the intrusion switch and lift it away from the computer [3].
Installing the intrusion switch
1
Insert the intrusion switch into the slot on the chassis.
2
Connect the intrusion switch cable to the system board.
3
Install the:
a
fan duct
b
cover
4
Follow the procedure in
After Working Inside Your Computer
.
Removing the expansion card
1
Follow the procedure in
Before Working Inside Your Computer
.
2
Remove the:
a
cover
b
fan duct
3
To remove the expansion card:
a
Pull the metal tab to open the expansion card latch [1].
b
Pull the tab forward [2] and pull the expansion card from the connector on the computer [3].
Removing and installing components
9