Dell PowerConnect FCS624S Release Notes - Page 44

Defect ID: DEFECT000301950 Technical Severity: High Summary: Access point advertisements may not be forwarded correctly. Symptom: Access point advertisements are not forwarded correctly. Probability: High Feature: SX Layer 3 Forwarding - IPV4 and IPV6 Function: Data Forwarding Reported In Release: FI 07.0.01 Defect ID: DEFECT000301985 Technical Severity: Medium Summary: In certain situations, replies to DNS queries are not acknowledged by the system. Feature: SX Network Management Function: DNS Reported In Release: FI 07.1.00 Defect ID: DEFECT000302157 Technical Severity: Medium Summary: If the switch is configured for a single span, and it has ~200+ VLANs then the switch reloads once the "show span" command is entered. Symptom: The router reloads. Probability: Medium Feature: FCX L2 Control Function: single spanning-tree Reported In Release: FI 07.0.01 Service Request ID: 251502 Defect ID: DEFECT000302183 Technical Severity: Medium Summary: The "CR" option is not correct for some commands. Symptom: "CR" option is not correct with the following commands: 1)With command "no ip address". 2)With command "area 1 stub". Probability: Medium Feature: FCX Management Functionality Function: CLI and parser Reported In Release: FI 07.0.01 Service Request ID: 251446 Defect ID: DEFECT000302360 Technical Severity: High Summary: Some directly connected IP addresses are not reachable, even though ARP table shows the correct ARP entry. Symptom: Directly connected IP address are not reachable, even though ARP table shows the correct ARP entry. Probability: Medium Feature: SX Layer 3 Forwarding - Ipv4 and IPv6 Function: Host Networking stack (IPv4 and IPv6) Reported In Release: FI 03.2.00 IronWare Software Release 07.2.00a for Brocade FastIron switches Release Notes v 1.0 Page 44 of 55