Dell PowerConnect FCS624S Release Notes - Page 7

Feature QoS for the SX-FI48GPP module Buffer profiles on the SXFI48GPP module IGMP snooping querier enhancement Flexible VE numbering New SNMP MIBs Description Refer to the FastIron Configuration Guide, section entitled... The SX-FI48GPP module supports QoS for packets in an oversubscribed environment. QoS configuration and functionality is different on the SX-FI48GPP compared to other interface modules. Configuring Quality of Service To increase or decrease the queue depth limits for a port on the SX-FI48GPP module, you must configure a buffer profile that defines the queue depth limits, and apply the buffer profile to the port. Dynamic buffer allocation for QoS priorities for FastIron X Series devices You can use the show ip multicast vlan command to display the querier information for a VLAN. This command displays the VLAN interface status and if there is any other querier present with the lowest IP address. Displaying querier information When configuring virtual routing interfaces on a device, you can now specify a number from 1 through 4095. However, the total number of virtual routing interfaces that are configured must not exceed the system-max limit of 512. Assigning an IP address to a virtual interface SNMP MIB support has been added for the following features: Dynamic ARP Inspection DHCP snooping IP Source Guard EMCP IronWare MIB Reference Guide IronWare Software Release 07.2.00a for Brocade FastIron switches Release Notes v 1.0 Page 7 of 55