Dell PowerConnect FCS624S Release Notes - Page 48

Defect ID: DEFECT000318038 Technical Severity: Medium Summary: The switch may reload if you issue "no owner prio " command before you configure "owner". Feature: SX Layer3 Control Protocols Function: VRRP/VRRP-E and slow-start timer- VRRP-E timer scale Reported In Release: FI 07.1.00 Defect ID: DEFECT000278649 Technical Severity: Medium Summary: The command 'gig-default auto-gig' does not appear in the running configuration. Symptom: The command 'gig-default auto-gig' does not appear in the running configuration. Workaround: No. If the connected end with all ports are same Gigabit configuration, gig-default config in global level would be workaround. Probability: Medium Feature: SX Layer1 features Function: link status - speed and duplex status Reported In Release: FI 05.1.00 Service Request ID: 239173 Defect ID: DEFECT000301157 Technical Severity: High Summary: sFlow is not sampling the traffic on the standby and member units on a FGS/FLS stack. Feature: FCX Network Management Function: sFlow Reported In Release: FI 07.2.00 Defect ID: DEFECT000304374 Technical Severity: Medium Summary: snAgGblDynMemUtil MIB object does not return the correct value. Feature: SX Network Management Function: SNMP V4/V6 Reported In Release: FI 07.2.00 Defect ID: DEFECT000309430 Technical Severity: High Summary: The switch may run out of available memory when there is continual SNMP polling to the device. Symptom: Router reloaded. Probability: Medium Feature: SX Network Management Function: SNMP V4/V6 Reported In Release: FI 07.0.01 Service Request ID: 259419 Defect ID: DEFECT000310242 Technical Severity: High Summary: DHCPS: Released IP addresses are withheld from distribution if an ARP entry exists for that IP Address. Feature: FCX DHCP Function: Server Reported In Release: FI 07.2.00 IronWare Software Release 07.2.00a for Brocade FastIron switches Release Notes v 1.0 Page 48 of 55