Dell PowerConnect FCS624S Release Notes - Page 51

Defect ID: DEFECT000278971 Technical Severity: Medium Summary: After the ASBR creates a summary LSA, the more specific LSAs are not flushed from neighbor routers. Symptom: Customer creates summary for external routes to conserve system resource, but they will not achieve the goal until the LSAs are aged out on neighbor routers, and the maximum waiting time could be 1800 seconds. Since the ASBR which originates these LSA will not flush them with an age of 3600, a reload may be necessary. Workaround: May require a reload. Feature: FCX Layer3 Control Protocols Function: OSPFV2 - IPV4 Reported In Release: FI 07.0.01 Probability: Low Defect ID: DEFECT000279775 Technical Severity: Medium Summary: LLDP does not show syslog message under 'show log' command. Symptom: LLDP syslog message is not seen under system log file. Feature: FCX L2 Control Function: LLDP Reported In Release: FI 07.0.01 Probability: Medium Defect ID: DEFECT000281430 Technical Severity: Medium Summary: When a virtual-nei is present on an edge router, ECMP will not be effective for OSPF external routes. Symptom: When a virtual-nei is present on an edge router, ECMP will not be effective for OSPF external routes. Feature: FCX Layer3 Control Protocols Function: OSPFV2 - IPV4 Reported In Release: FI 07.1.00 Defect ID: DEFECT000286397 Technical Severity: Medium Summary: "no global-stp" is lost after a reload. No failover or switch-over. Symptom: After reloading the FCX unit, the command "no global-stp" is lost. Workaround: The user will have to reconfigure this command after a reload. Feature: FCX Management Functionality Function: CLI and parser Reported In Release: FI 07.1.00 IronWare Software Release 07.2.00a for Brocade FastIron switches Release Notes v 1.0 Page 51 of 55