Dell PowerConnect FCS624S Release Notes - Page 49

Defect ID: DEFECT000310243 Technical Severity: High Summary: "Show ip dhcp-server flash" and "Show ip dhcp-server bind" does not use page-view. Feature: FCX DHCP Function: Server Reported In Release: FI 07.2.00 Defect ID: DEFECT000310245 Technical Severity: High Summary: When you have a server with 500+ clients active in the binding database, the command "show ip dhcp-server bind" and "show ip dhcp-server flash" outputs will be truncated after 474 lines, preventing an administrator from seeing all clients. Feature: FCX DHCP Function: Server Reported In Release: FI 07.2.00 Defect ID: DEFECT000310246 Technical Severity: High Summary: Summary: Address distribution is staring with .2 when the first ip address in the pool is .1 Feature: FCX DHCP Function: Server Reported In Release: FI 07.2.00 Customer reported defects closed without code in Release R07.2.00 The following table lists the customer defects fixed in this release. Defect ID: DEFECT000284861 Technical Severity: Medium Summary: FESX6 does not send ICMPv6 packet with 1452 byte. Symptom: FESX6 does not send ICMPv6 packet with 1452 byte. Reason Code: Already Fixed in Release Probability: High Feature: SX Layer 3 Forwarding - IPV4 and IPV6 Function: IP MTU & Fragmentation Reported In Release: FI 05.0.00 Service Request ID: 246171 Open defects in Release R07.2.00 The following table lists the defects that are open in this release. Defect ID: DEFECT000279513 Technical Severity: High Summary: Sflow stops sampling after changing the configuration from a very large sampling rate to a very small sampling rate. Symptom: Sflow stops sampling after changing the configuration from a very large sampling rate to a very small sampling rate. Workaround: Perform "no sflow enable" and "sflow enable", then sflow starts to work again. Feature: FCX Network Management Function: sFlow Reported In Release: FI 07.0.01 Probability: Low IronWare Software Release 07.2.00a for Brocade FastIron switches Release Notes v 1.0 Page 49 of 55