Dell PowerConnect FCS624S Release Notes - Page 53
Defect ID, Technical Severity, Summary, Symptom, Feature, Function, Service Request ID, Reported
View all Dell PowerConnect FCS624S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Defect ID: DEFECT000296833 Technical Severity: Medium Summary: Device will close down a telnet management session as soon as it receives a FIN even if output is pending. Symptom: Device will close down a telnet management session as soon as it receives a FIN even if output is pending. Feature: FCX Management Functionality Function: IPV4/V6 Telnet Service Service Request ID: 246740 Reported In Release: FI 07.0.01 Defect ID: DEFECT000298768 Technical Severity: Medium Summary: Copying an image from the flash (primary or secondary) to an external tftp server takes longer time than previous versions. Symptom: Copying an image from the flash (primary or secondary) to an external tftp server takes longer time than previous versions. This issue does not have any impact when copying an image from the TFTP server to the system flash. Workaround: No workaround is available at this time. Feature: SX Network Management Function: TFTP Configuration- Software V4/V6 Reported In Release: FI 07.2.00 Probability: High Defect ID: DEFECT000309517 Technical Severity: Medium Summary: Web management only allows ve configuration from 1 to 255. Symptom: User can only configure ve 1 to 255 from web management. Flexible ve configuration which allows ve numbering from 1 to 4095 using CLI is not available in web management. Workaround: User can use CLI to configure ve number other than 1 to 255. Feature: SX Network Management Function: Web Management Reported In Release: FI 07.2.00 Probability: Medium Defect ID: DEFECT000309525 Technical Severity: Medium Summary: DHCP discover packets are sent out the management interface even though there is an IP address configured for the management interface. Symptom: DHCP discover packets are sent out the management interface even though there is an IP address configured for the management interface. The source IP of the DHCP discover packets is the IP address configured for the management interface. Feature: SX Layer 3 Forwarding - IPV4 and IPV6 Function: Host Networking stack (IPV4 and IPV6) Reported In Release: FI 07.2.00 Probability: High IronWare Software Release 07.2.00a for Brocade FastIron switches Release Notes v 1.0 Page 53 of 55