Dell PowerConnect M6220 Configuration Guide - Page 121
Example #1: Configuring IGMP Proxy on the Router, Example #2: View IGMP Proxy Configuration Data
![]() |
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Example #1: Configuring IGMP Proxy on the Router This command enables the IGMP Proxy on the router. To enable IGMP Proxy on the router no multicast routing protocol should be enabled and also multicast forwarding must be enabled on the router. Use these commands from the Interface mode: console#configure ip routing ip multicast ip igmp interface vlan 15 ip igmp-proxy Additional configuration options are available for the igmp-proxy command: reset-status unsolicited-report-interval Press Enter to execute the command. Reset All the proxy interface status parameters. Configure IGMP Proxy unsolicited report interval. The value of the unsolicited report interval can range from 1 to 260 seconds. The default is 1 second. Use this command from the Interface mode. Example #2: View IGMP Proxy Configuration Data You can use various commands from Privileged EXEC or User EXEC modes to show IGMP proxy configuration data. • Use the following command to display a summary of the host interface status parameters. It displays the parameters only when IGMP Proxy is enabled. console#show ip igmp-proxy Interface Index vlan 15 Admin Mode Enabled Operational Mode Disabled • Use the following command to display interface parameters when IGMP Proxy is enabled: console#show ip igmp-proxy interface • Use this command to display information about multicast groups that IGMP proxy reported. It displays a table of entries with the following as the fields of each column. console#show ip igmp-proxy groups • Use the following command to display information about multicast groups that IGMP proxy reported. It displays a table of entries with the following as the fields of each column: console#show ip igmp-proxy groups detail Multicast 121
![](/manual_guide/products/dell-powerconnect-m6220-configuration-guide-92971e5/121.png)