Dell PowerConnect M6220 Configuration Guide - Page 21
Port Description, CLI Example, Example #1: Enter a Description for a Port
![]() |
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
console(config)#logging 192.168.10.65 console(Config-logging)#? description exit level port Specify syslog server description. To exit from the mode. Specify logging level. Specify UDP port (default is 514). console(Config-logging)#level ? alert critical debug emergency error info notice warning Immediate action needed Critical conditions Debugging messages System is unusable Error conditions Informational messages Normal but significant conditions Warning conditions console(Config-logging)#level critical Port Description The Port Description feature lets you specify an alphanumeric interface identifier that can be used for SNMP network management. CLI Example Use the commands shown below for the Port Description feature. Example #1: Enter a Description for a Port This example specifies the name "Test" for port 1/g10: console#configure console(config)#interface ethernet 1/g2 console(config-if-1/g2)#description Test console(config-if-1/g2)#exit console(config)#exit Example #2: Show the Port Description console#show interfaces description ethernet 1/g2 Port Description 1/g2 Test System Configuration 21
![](/manual_guide/products/dell-powerconnect-m6220-configuration-guide-92971e5/21.png)