Dell PowerConnect M6220 Configuration Guide - Page 125
Example: PIM-DM, First, con an OSPF
![]() |
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
• Densely distributed receivers • A ratio of few senders-to-many receivers (due to frequent flooding) • High volume of multicast traffic • Constant stream of traffic Example: PIM-DM The following example configures PIM-DM for IPv4 on a router. First, configure an OSPF1 router and globally enable IP routing, multicast, IGMP, and PIM-DM. Next, enable routing, IGMP, PIM-DM, and OSPF on one more interfaces. console#configure router ospf router-id 3.3.1.1 exit ip routing ip multicast ip igmp ip pimdm interface vlan 1 routing ip address 3.3.3.1 255.255.255.0 ip pimdm ip igmp ip ospf area 0 exit interface vlan 3 routing ip address 1.1.1.1 255.255.255.0 ip pimdm ip igmp ip ospf area 0 exit exit 1. OSPF configuration is added as a unicast protocol for illustration purposes; static unicast routing could also be configured. Multicast 125
![](/manual_guide/products/dell-powerconnect-m6220-configuration-guide-92971e5/125.png)