Dell PowerConnect M6220 Configuration Guide - Page 96
Example #6 Con MAC Access Group, Example #7: Setup an ACL with Permit Action
![]() |
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
mplsmcast, mplsucast, netbios, novell, pppoe, rarp). console(config-mac-access-list)#deny any 00:11:22:33:44:55 00:00:00:00:FF:FF log ? assign-queue mirror redirect Configure the Queue Id assignment attribute. Configure the packet mirroring attribute. Configure the packet redirection attribute. Press enter to execute the command. console(config-mac-access-list)#deny any 00:11:22:33:44:55 00:00:00:00:FF:FF log Example #6 Configure MAC Access Group console(config)#interface ethernet 1/g5 console(config-if-1/g5)#mac access-group mac1 ? in Enter the direction . Press enter to execute the command. console(config-if-1/g5)#mac access-group mac1 in ? Enter the sequence number (greater than 0) to rank precedence for this interface and direction. A lower sequence number has higher precedence. Press enter to execute the command. console(config-if-1/g5)#mac access-group mac1 in 6 Example #7: Setup an ACL with Permit Action console# Config console(config)#mac access-list extended mac2 console(config-mac-access-list)#permit ? any Configure a match condition for all the source MAC addresses in the Source MAC Address field. Enter a MAC Address. console(config-mac-access-list)#permit any ? any bpdu Configure a match condition for all the destination MAC addresses in the Destination MAC Address field. Match on any BPDU destination MAC Address. Enter a MAC Address. 96 Device Security
![](/manual_guide/products/dell-powerconnect-m6220-configuration-guide-92971e5/96.png)