Dell PowerConnect M6220 Configuration Guide - Page 63
Using the Web Interface to Con VLAN Routing
![]() |
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
console(config-if-1/g2)#switchport mode general console(config-if-1/g2)#switchport general allowed vlan add 10 console(config-if-1/g2)#switchport general pvid 10 console(config-if-1/g2)#exit console#configure console(config)#interface ethernet 1/g3 console(config-if-1/g3)#switchport mode general console(config-if-1/g3)#switchport general allowed vlan add 20 console(config-if-1/g3)#switchport general pvid 20 console(config-if-1/g3)#exit Example 3: Set Up VLAN Routing for the VLANs and Assign an IP Address The following code sequence shows how to enable routing for the VLANs and how to configure the IP addresses and subnet masks for the virtual router ports.: console#configure console(config)#interface vlan 10 console(config-if-vlan10)#routing console(config-if-vlan10)#ip address 192.150.3.1 255.255.255.0 console(config-if-vlan10)#exit console#configure console(config)#interface vlan 20 console(config-if-vlan20)#routing console(config-if-vlan20)#ip address 192.150.4.1 255.255.255.0 console(config-if-vlan20)#exit Example 4: Enable Routing for the Switch: In order for the VLAN to function as a routing interface, you must enable routing on the VLAN and on the switch. console(config)#ip routing Using the Web Interface to Configure VLAN Routing Use the following screens to perform the same configuration using the Web Interface: • Switching > VLAN > VLAN Membership. To create the VLANs and specify port participation. • Switching > VLAN > Port Configuration. To set the PVID and VLAN type. • Routing > IP > Configuration. To enable routing for the switch. • Routing > IP > Interface Configuration. To enable routing for the VLANs and configure their IP addresses and subnet masks. Routing Configuration 63
![](/manual_guide/products/dell-powerconnect-m6220-configuration-guide-92971e5/63.png)