Dell PowerConnect M6220 Configuration Guide - Page 52
Example #12: Show Group MAC Address Table, port-aggregator group <Group Id>
![]() |
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
uplink ports should be active; otherwise, all the internal ports in the Group will be brought down. By default, the minimum active uplinks for a Group is 1, which means at least one uplink port should be active for the Aggregator Group to be active. console(config)#port-aggregator group 2 console(config-aggregator-2)#minimum active uplinks 2 console(config-aggregator-2)# Example #12: Show Group MAC Address Table Use the show bridge address-table [port-aggregator group < GroupId >] command to show the MAC address table for a particular aggregator group. [port-aggregator group is an optional parameter in the command and, if not specified, shows all the MAC entries in all the Groups. console#show bridge address-table port-aggregator group 2 Aggregator Group: 2 Aging time is 300 Sec VLAN MAC Address Port Type 3 0006.2932.814D 1/g2 Static 1001 0006.2932.814B 1/g17 Static Example #13: Show Group VLAN Table Use the show vlan [port-aggregator group < GroupId >] command to show the VLAN table for a particular aggregator group. [port-aggregator group is an optional parameter in the command and, if not specified, shows all the MAC entries in all the Groups. console#show vlan port-aggregator group 2 Aggregator Group: 2 VLAN AggregatorGroup Type Authorization 3 2 Static Required 1000 2 Static Required console#show vlan VLAN AggregatorGroup Type 52 Switching Configuration Authorization
![](/manual_guide/products/dell-powerconnect-m6220-configuration-guide-92971e5/52.png)